86-371-67679623,67824470,67836621
Unit 1, Building 6, No. 1, Cuizhu Street, High-Tech Development Zone, Zhengzhou, Henan, China (Mainland)
All Aluminum aaac acsr Conductor
1.Applications
All Aluminum Conductor(AAC,AAAC and ACSR) electronic cable have been widely used in power transmission lines with various voltage levels,because they have such good characteristics as simple structure,convenient installation and maintenance,low cost large transmission capacity.And they are also suitable for laying across rivers valleys and the places where special geographical features exist.
2.Service Performance
(1).The permissible long-time operating temperature for aerial conductor electronic cable is 70oC.
(2).Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area,the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
(3).When connecting conductors,the AAC conductor electronic cable beside the connecting tube cant be prominent.Otherwise,the force on the operating conductors will be unbalanced.After connectors are install,the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
(4).Under installaion,the arc downing stress of all the conductors should be the same.With in the permissible distance of crossing buildings or dropping to the ground,the stress can be 10-15% higher than regular stress.
3.Material Standard
(1).The hard aluminum conductor used for AAC and ACSR conforms to the standard GB/T 17048-1997(equivalent to IEC 60889:1987).
(2).The zinc coated steel wire used for ACSR conforms to IEC 60888:1987.
(3).Electronic cable can be arranged according to customers requirements for material standard,etc.
Construction of All Aluminum Conductor and Aluminum Conductor Steel Reinforced
4.Technical details
AAC Technical Characteristics Based on Standard DIN 48201 / DIN EN50182
| Code number | Area | Number of wires | Wire diameter | Conductor diameter | Linear mass | Rated strength | D.C. resistance at 20oC |
| mm2 | No. | mm | mm | kg/km | kN | Ω/km | |
| 16 | 15.9 | 7 | 1.7 | 5.1 | 43.4 | 3.02 | 1.7986 |
| 25 | 24.2 | 7 | 2.1 | 6.3 | 66.3 | 4.36 | 1.1787 |
| 35 | 34.4 | 7 | 2.5 | 7.5 | 93.9 | 6.01 | 0.8317 |
| 50 | 49.5 | 7 | 3 | 9 | 135.2 | 8.41 | 0.5776 |
| 50 | 48.3 | 19 | 1.8 | 9 | 132.9 | 8.94 | 0.5944 |
| 70 | 65.8 | 19 | 2.1 | 10.5 | 180.9 | 11.85 | 0.4367 |
| 95 | 93.3 | 19 | 2.5 | 12.5 | 256.3 | 16.32 | 0.3081 |
| 120 | 117 | 19 | 2.8 | 14 | 321.5 | 19.89 | 0.2456 |
| 150 | 147.1 | 37 | 2.25 | 15.8 | 405.7 | 26.48 | 0.196 |
| 185 | 181.6 | 37 | 2.5 | 17.5 | 500.9 | 31.78 | 0.1588 |
| 240 | 242.5 | 61 | 2.25 | 20.3 | 671.1 | 43.66 | 0.1193 |
| 300 | 299.4 | 61 | 2.5 | 22.5 | 828.5 | 52.4 | 0.0966 |
ACSR Technical Characteristics Based on Standard BS 215-2
| Code name | Nominal aluminium area | Stranding and wire diameter | Sectional area of aluminium | Total sectional area | Approx. overall diameter | Approx. mass | Calculated D.C. resistance at 20oC | Calculated breaking load | |
| Al | Steel | ||||||||
| mm2 | No./mm | mm2 | mm2 | mm | kg/km | Ω/km | kN | ||
| RABBIT | 50 | 6/3.35 | 1/3.35 | 52.88 | 61.7 | 10.05 | 214 | 0.5426 | 18.35 |
| DOG | 100 | 6/4.72 | 7/1.57 | 105 | 118.5 | 14.15 | 394 | 0.2733 | 32.7 |
| WOLF | 150 | 30/2.59 | 7/2.59 | 158.1 | 194.9 | 18.13 | 726 | 0.1828 | 69.2 |
| DINGO | 150 | 18/3.35 | 1/3.35 | 158.7 | 167.5 | 16.75 | 506 | 0.1815 | 35.7 |
| LYNX | 175 | 30/2.79 | 7/2.79 | 183.4 | 226.2 | 19.53 | 842 | 0.1576 | 79.8 |
| ZEBRA | 400 | 54/3.18 | 7/3.18 | 428.9 | 484.5 | 28.62 | 1621 | 0.0674 | 131.9 |
AAAC Technical Characteristics Based on Standard BS 3242
| Code name | Nominal aluminium area | Stranding and wire diameter | Sectional area | Approx. overall diameter | Approx. mass | Calculated D.C. resistance at 20oC | Calculated breaking load |
| mm2 | No./mm | mm2 | mm | kg/km | Ω/km | kN | |
| ALMOND | 25 | 7/2.34 | 30.1 | 7.02 | 82 | 1.094 | 8.44 |
| CEDAR | 30 | 7/2.54 | 35.47 | 7.62 | 97 | 0.9281 | 9.94 |
| FIR | 40 | 7/2.95 | 47.84 | 8.85 | 131 | 0.688 | 13.4 |
| HAZEL | 50 | 7/3.30 | 59.87 | 9.9 | 164 | 0.5498 | 16.8 |
| OAK | 100 | 7/4.65 | 118.9 | 13.95 | 325 | 0.2769 | 33.3 |
| ASH | 150 | 19/3.48 | 180.7 | 17.4 | 497 | 0.183 | 50.65 |
| ELM | 175 | 19/3.76 | 211 | 18.8 | 580 | 0.1568 | 59.1 |
| UPAS | 300 | 37/3.53 | 362.1 | 24.71 | 997 | 0.09155 | 101.5 |
THE PRODUCTS PICTURE
THE PACKING AND SHIPMENT
Soft-coil , Wooden Drum , Wooden-Steel Drum , Carton , Plastic Bag
We can do the package according to the customer's requires
Best services and professional technology
1.We can make sample production according to your drawings and specifications, pls feel free
to contact us for samples.
2. If possible, please provide us a drawing or specification table for any product so that we can greatly improve our work efficiency and save your time and energy.
3.Don't hesitate to contact us for any questions .
Company introduction
Jinshui Wire&Cable Group, established in the year of 2001, is located in Zhengzhou, Henan Province. Group consists of 3 subsidiary companies which are Zhengzhou Jinshui Industry & Commerce Co.,Ltd; Zhengzhou Huibang Wire&Cable Co.,Ltd as well as Zhengzhou Baite Cable Factory. Jinshui has passed ISO9001 and CE certification. With strong capacity of R&D and aims of providing superior products to our customers.
Our products range is as following:
Bare conductors (AAC,AAAC,ACSR,Galvanized steel wire)
Aerial Bounded Cable(Duplex,Triplex,Quadruplex)
PVC insulated wire(Rated voltage to 450/750V)
PVC insulated Power Cable
XLPE insulated Power Cable
Rubber sheathed Cable
Control Cable
Welding Cable
Cable Accessories
Products above can be manufactured in accordance with the standard of GB,IEC,BS,DIN,ASTM,JIS,NF and AS/NZS, etc. Meanwhile, we are able to produce special products based on customer's requirements.
Through more than 10 years' development, our products have been exported to North America, South America, Africa, Middle East, as well as other Asian countries. We have established long-term business relationship with many esteemed companies over the world. As a global company, Jinshui Wire and Cable Group is devoted to introduce international advanced equipments and technology to produce perfect products by applying exquisite technique and strict quality control management.
Q1:Are you a factory or trading company?
We are the manufacturer of high quality bare conductor, building wire , ABC cable , power cable
Q2:What is the adantages of our company?
Competitive price and superior quality of all products.
High technical supports and good afterselling service.
Q3:What is MOQ?
Low MOQ:500M/pcs
Q4:Delievery time ?
7-15Days after we received your deposit.
Q5:Can I get free samples?
We can supply the free sample , the customer need to cover the freight cost
